工作職責:
1.Study customer drawing, specification to fully understand customer needs.
研究客戶圖紙,規格書等,充分理解客戶需求。
2.Lead Agricultural machinery vehicle cable assembly process design,prevent/mitigate the process development potential risk.
主導農用車輛線束組裝工藝設計,防止/減輕工藝開發的潛在風險。
3.Lead cable assembly production equipment selection and non-standard equipment design review, driving the process workflow and equipment improvement solution.
主導線束組裝標準設備選型和非標設備設計評審,推動實施工藝流程和設備改善方案
4. Provide problem solving solution during sample making phase related process & equipment.
在樣品制作階段提供相關工藝和設備的問題解決方案
5. Driving the process realization and process performance (e.g. C/T, Yield, OEE) to meet target.
推動工藝實現和制程指標達成(例如: C/T, Yield, OEE)
6. Lead the establishment of MES system, including site setup/system debugging/acceptance
主導建立MES系統,包括站點設定/系統調試/驗收
7.Establish and maintain BOM list/assembly labour-hour in internal ERP system
在內部ERP系統中建立和維護BOM清單/組裝工時
8.Finish process development related documentation, promote machine & process release to mass production.
完成工藝開發相關文件,推動設備和工藝順利進入量產。
9. Lesson learned collection and best practice sharing
經驗教訓收集和***實踐分享
10. Other job assignment by manager.
工程部經理安排的其它工作。
任職要求:
College or BS degree in related mechanical or electronically Science/Engineering
大專以上學歷,機械或電子專業。
3+ years’ working experience as engineer in multinational manufacturing companies.
3年以上外企工作經驗。
3+years cable assembly or connector related working experience.
3年及以上線束或連接器工作經驗。
Have good English speak/read skill. 具有良好的英語讀說能力
Be familiar with CAD, SolidWorks or Pro/E software 熟悉CAD, SolidWorks 或Pro/E繪圖軟件
Familiar with fixture concept design. 熟悉治工具設計
Familiar with ERP system 熟悉ERP系統流程
Familiar with harness production Process flow and PFMEA熟悉線束裝配生產工藝流程和PFMEA
Familiar with TS16949/ GB 16151-2008 and other system standards熟悉TS16949/ GB 16151-2008等體系要求
Familiar with CC/SC definition and application 熟悉CC/SC的定義和應用
Familiar with basic requirement for error-proofing and fool-proofing熟悉防呆防錯的基本要求
Have knowledge of agricultural machinery vehicle cable product application. 了解農機車輛線束產品應用
Familiar with APQP document requirements and work standards 熟悉APQP文件的要求和制作標準